This chip resetter will eliminate the problems you may experience when your printer does not recognize your Epson compatible cartridges. There is no longer a need to reinstall your printer software.
CURRENTLY TEMPORARILY UNAVAILABLE
In 4 easy steps, the resetter will reset the chip in your Epson compatible (G&G) ink cartridge:
1. Remove the white plastic around the pins of the chip resetter.
2. Line up the pins on the resetter with the contacts of the chip on your cartridge.
3. Press the resetter and cartridge firmly together and wait for the red and green lights to flash. (When the green light flashes 5 times, this means the chip is reset. If the red light flashes go back to Step 2 and try again.
4. When the green light stops flashing, you are ready to install the cartridge into the printer and print.
<< Back
Compatible Models:
